Health and Safety Code § 372.002: WATER SAVING PERFORMANCE STANDARDS
No bill in the 90th Legislature changes this section yet
Follow this section in Texas Bill Atlas: a bill filed later that changes it shows up as new.
Part of Health and Safety Code Chapter 372, with every bill that changes it.
Bills are matched to sections automatically from their text and can be missed, for example when a bill changes a whole chapter at once or renumbers sections. No bill listed here does not mean no bill changes this section.
Current law
Sec. 372.002. WATER SAVING PERFORMANCE STANDARDS. (a) A person may not sell, offer for sale, distribute, or import into this state a plumbing fixture for use in this state unless:
(1) the plumbing fixture meets the water saving performance standards provided by Subsection (b); and
(2) the plumbing fixture is listed by the commission under Subsection (c).
(b) The water saving performance standards for a plumbing fixture are the following standards:
(1) for a sink or lavatory faucet or a faucet aerator, maximum flow may not exceed 2.2 gallons of water per minute at a pressure of 60 pounds per square inch;
(2) for a shower head, maximum flow may not exceed 2.5 gallons of water per minute at a constant pressure over 80 pounds per square inch;
(3) for a urinal and the associated flush valve, if any, sold, offered for sale, or distributed in this state before January 1, 2014:
(A) maximum flow may not exceed an average of one gallon of water per flush; and
(B) the urinal and the associated flush valve, if any, must meet the performance, testing, and labeling requirements prescribed by American Society of Mechanical Engineers Standard A112.19.2-2008 and Canadian Standards Association Standard B45.1-2008 "Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals";
(4) except as provided by Subsection (g), for a urinal and the associated flush valve, if any, sold, offered for sale, or distributed in this state on or after January 1, 2014:
(A) maximum flow may not exceed an average of 0.5 gallons of water per flush; and
(B) the urinal and the associated flush valve, if any, must meet the performance, testing, and labeling requirements prescribed by the following standards, as applicable:
(i) American Society of Mechanical Engineers Standard A112.19.2-2008 and Canadian Standards Association Standard B45.1-2008 "Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals"; or
(ii) American Society of Mechanical Engineers Standard A112.19.19-2006 "Vitreous China Nonwater Urinals";
(5) for a toilet sold, offered for sale, or distributed in this state before January 1, 2014:
(A) maximum flow may not exceed an average of 1.6 gallons of water per flush; and
(B) the toilet must meet the performance, testing, and labeling requirements prescribed by the following standards, as applicable:
(i) American Society of Mechanical Engineers Standard A112.19.2-2008 and Canadian Standards Association Standard B45.1-2008 "Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals"; and
(ii) American Society of Mechanical Engineers Standard A112.19.14-2006 "Six-Liter Water Closets Equipped With a Dual Flushing Device";
(6) except as provided by Subsection (h), for a toilet sold, offered for sale, or distributed in this state on or after January 1, 2014:
(A) the toilet must be a dual flush water closet that meets the following standards:
(i) the average flush volume o
The section continues: whole chapter.
Links
- This chapter as it stands now, Markdown copy of the Texas Legislative Council's statute files
- Official text on statutes.capitol.texas.gov
- RSS feed of actions on these bills
Texas Bill Atlas is an independent research tool, not an official state website.